prodotti

Sagom rubber è in grado di produrre e sviluppare tubazioni in gomma preformate con diametro interno da 5mm a 60mm con materiali adatti ad operare condizioni di temperature da -40°÷ 220° C e pressioni fino a 4,5 Bar. I materiali utilizzati sono sviluppati in funzione dell’applicazione o delle specifiche del cliente:
EPDM, AEM-HT, CSM, VMQ, AEM, CR, NBR+PVC, FVMQ, NBR

TUBI ARIA

RUBBER MATERIAL>CR>AEM< (VAMAC)>HT-AEM< (VAMAC)>VMQ<(SILICONE) with internal layer for oil resistance in >FVMQ<
Kitted reinforcementPara-aramidePara-aramideMeta-aramideMeta-aramide
Operative temp-35°C +100°C PEAK +110°C-35°C +150°C PEAK +160°C-35°C +180°C PEAK +190°C-40°C +200°C PEAK +220°C
Operative max pressure2.1 bar2.1 bar2.1 bar2.1 bar
Inside Duameter availablemin 5mm max 60mmmin 5mm max 60mmmin 5mm max 60mmmin 5mm max 60mm

 TUBI OLIO

RUBBER MATERIALINNER LAYER: >NBRCSMCR<>AEM< (VAMAC)
Knitted reinforcementPara-aramidePara-aramide
Operative temperature-35°C +120°C Peak +135°C-35°C +150°C Peak +160°C
Operative max pressure4,5 bar4,5 bar
Inside Diameter availablemin 5mm max 20mmmin 5mm max 20mm

 TUBI RAFFREDDAMENTO

RUBBER MATERIAL>EPDM<>AEM< (VAMAC)>VMQ< (SILICON)
Knitted reinforcementPara-aramide polyesterPara-aramide Meta-aramide
Operative temperature-40°C +140°C Peak +160°C-35°C +150°C Peak +170°C-40°C +200°C Peak +220°C
Operative max pressure4,5 bar4,5 bar4,5 bar
Inside Diameter availablemin 5mm - max 60mmmin 5mm - max 60mmmin 5mm - max 60mm
External oil resistanceNOYESNO

TUBI IN GOMMA MONOSTRATO PER APPLICAZIONI VARIE

RUBBER MATERIALSULFUR >EPDMPeroxide >EPDM>NBR+ PVC>CR<>AEM< (VAMAC)
Operative temp.-40°C +120°C Peak +125°C-40°C +140°C Peak +160°C-35°C +125°C Peak +130°-35°C +100°C Peak +110°C-35°C +150°C Peak +160°C
Operative maximux pressure1 bar1 bar1 bar1 bar1 bar
Inside Diameter availablemin 5mm
max 70mm
min 5mm
max 70mm
min 5mm
max 70mm
min 5mm
max 70mm
min 5mm
max 70mm
Oil resistanceNONOYESYESYES